Finished installing the loft roof installation and most of the main roof.
This allowed me to make progress on the fascia boards. I started by painting them and drilling a ton of holes for the roof venting. I could have bought plastic vents but it would have cost about $120. To drill the holes quickly and accurately I made a jig out of a 2x4 on the drill press. I stapled screening on the back side to keep bugs out.
I put most of the roofing on. I just have a few pieces left to install but it will keep the rain out. I used ladders for the loft area but ending up renting scaffolding to do the rest. It was cheap ($50) and made the job way easier, faster and safer. My roommate what kind enough to paint my front door for me.
I finished off today by staring on the shower install. I put 1/8" board behind it to protect the vapour barrier and cut the hole in the floor for the drain. It's a big shower but it just fits in.
I've also picked up the siding and interior wall covering. Both need to be painted, so much work to do before I move at the end of the month.
Expenses to date: $20,957
